Top 20 Two-Component Adhesive Dual Cartridge Manufacturers: Who Fits Which Job (2026)

Last updated: October 2026

Who are the best dual cartridge manufacturers in 2026? Ebestron leads for factory-direct Mixpac-compatible blank cartridges from 50 mL to 1500 mL. medmix (MIXPAC) sets global A/B/C/F-System outlet standards, while Nordson EFD leads in u-TAH coaxial tubes. Fischbach KG specializes in high-speed airless self-venting cartridges.

Disclosure: This guide is published by Ebestron. We list ourselves first because this is our website, not because we claim to be the market leader. The other 19 manufacturers are grouped by what they’re best for, in no particular order within each group.

How We Selected These Dual Cartridge Manufacturers (and Category Scope)

Selecting a qualified dual cartridge manufacturer requires separating primary plastic injection molders from chemical resellers. We evaluated global producers against four engineering selection criteria: in-house barrel and piston molding capability, published volumetric mix ratio tolerances, resin breadth across PP, HDPE, PBT, and PA6 Nylon, and ISO 9001:2015 quality management standards.

Our category scope covers empty two-component adhesive packaging from 2.5 mL micro-syringes up to 1500 mL bulk barrels. Supported volumetric ratios include 1:1, 2:1, 3:1, 4:1, 5:1, and 10:1. For instance, Ebestron manufactures dual cartridges from 50mL to 1500mL across every standard ratio. Similarly, Btektech catalogs capacities from 5 ml to 1500 ml. Trading companies, distributors, sourcing platforms, directories, media websites, and used-equipment dealers were excluded. All company information was verified against official websites and public sources in October 2026.

We’ve grouped the 20 manufacturers into three supply-chain roles. This structure helps the buyer match supplier type to their estimated annual order volume.

• Companies 1–7 represent Global Tier-1 System Innovators that define A/B/C/F/L, u-TAH, SBS, and Ratio-Pak dimensional interfaces.
• Companies 8–14 cover Direct OEM Injection-Molding Factories and Dispensing Integrators offering empty barrels, custom pistons, and pneumatic retainer hardware.
• Companies 15–20 feature Specialized Converters and Low-Waste Producers providing AS9100D aerospace vacuum repackaging, collapsible foil sleeves, and regional testing labs.

What Is the Difference Between Side-by-Side and Coaxial Dual Cartridges?

Side-by-side (twin) cartridges place the Part A main resin cylinder and the Part B catalyst cylinder in parallel tubes joined by a rigid neck bridge and a rear flange. Coaxial cartridges nest a smaller inner hardener tube in a larger, outer resin cylinder. In a coaxial tube system, both pistons move in unison under a single circular plunger rod. Side-by-side barrels are predominant in 50ml precision, 200ml and 400ml structural bonding because in these systems the two chemical chambers are never created with an internal partition wall.

Coaxial geometries excel in 150 mL, 300 mL, and 380 mL 10:1 construction anchoring. Field crews can extrude high viscosity mortar with a standard single-barrel caulking applicator. However, volatile monomers can slowly diffuse across the shared inner coaxial tube wall during warm warehouse storage. Consider benchtop sizes and see our 50 mL dual cartridge sizing and ratio comparison guide to compare square-back A-System and twist-lock B-System geometries.

Top 20 Dual Cartridge Manufacturers Comparison Table (2026 Master Matrix)

The comparison matrix below provides benchmarks for the 20 verified producers in the following areas: headquarters location, founding year, primary application scenario, supported mL capacities, and volumetric mix ratios. Standardized cartridge outlet geometries trace back to US Patent 2011/0081499 A1 and US Patent 7,140,797. Patent 7,140,797. Use this table to shortlist suppliers that work with your target barrel resin.

Global Tier-1 System Innovators & Integrated Dispensing Brands (Companies 1–7)

Tier-1 system innovators define the physical neck threads, bayonet lugs, and plunger spacing used by global assembly plants. In regional distributor catalogs, branded starter kits and replacement barrels carry multi-tiered retail markups based on order volume and tooling. Industrial OEMs therefore compare Tier-1 Western brands against factory-direct compatible molders.

1. Ebestron: Best for PP, PE, PBT, and PA6 resin molding with fast OEM turnarounds

Headquarters: Kunshan, Jiangsu Province, China (Donghan Intelligent Manufacturing Park)
Founded: Founded in 2023 (Shanghai Ebestron New Materials Co., Ltd., backed by precision molding engineering)
Company type: Factory-direct OEM injection molder and integrated 2K adhesive packaging manufacturer
Official website: adhesivespackage.com
Main products: 50 mL to 1500 mL side-by-side and coaxial dual cartridges (1:1, 2:1, 4:1, 10:1), static mixing nozzles, and manual, pneumatic, and battery dispensing guns
Key capabilities: Multi-resin precision injection molding in PP, PE, PBT, and PA6 (Nylon) with Mixpac A/B/C/F, Nordson EFD, and Techcon SBS cross-compatibility and fast OEM turnarounds
Certifications & standards: ISO 9001 certified quality management system; CE and RoHS material compliance; ISO 2859-1 AQL sampling; ASTM F88, D3078, F2054, and F1140 package testing

Ebestron manufactures two-component adhesive dual cartridges at its Kunshan injection molding plant. The factory molds polypropylene, polyethylene, PBT, and PA6 barrels that fit Mixpac, Nordson EFD, and Techcon dispensers. Each production lot undergoes ISO 2859-1 AQL dimensional checks alongside ASTM D3078 vacuum leak validation.

Published highlights: Molds full 50 mL to 1500 mL blank dual cartridges across 1:1, 2:1, 4:1, and 10:1 ratios in PP, PE, PBT, and Nylon with published ASTM D3078 bubble leak and ASTM F2054 burst validation.

Potential disadvantage: Supplies empty cartridges, static mixers, and dispensing guns only; doesn’t offer contract chemical adhesive toll-blending or pre-filled chemical formulation services.

Best suited for: Adhesive formulators and industrial OEMs seeking factory-direct Mixpac-compatible blank dual cartridges in PP, PBT, or Nylon with fast OEM production turnarounds.

2. medmix (MIXPAC): Best for Original A/B/C/F/L outlet standards and ISCC PLUS greenLine PCR

Headquarters: Baar, Canton of Zug, Switzerland
Founded: Founded in 1921 (Sulzer Mixpac heritage; spun off as independent SIX-listed medmix AG in 2021)
Company type: Global Tier-1 precision dispensing system innovator and original MIXPAC patent holder
Official website: medmix.swiss
Main products: MIXPAC A-System, B-System, C-System, F-System, L-System, and greenLine PCR dual cartridges (2.5 mL to 1500 mL), Quadro and T-Mixer static mixers, and COX dispensers
Key capabilities: Swiss-engineered anti-crossover rotary B-System and F-System outlet interfaces, post-consumer recycled (PCR) greenLine molding, and global multi-plant supply
Certifications & standards: ISO 9001, ISO 14001, ISO 13485 (medical/dental sites), and ISCC PLUS certified sustainable material chain of custody

Swisstech group medmix AG operates the original MIXPAC product division after spinning off from Sulzer in 2021. Its color-coded B-System and F-System outlets separate hardener and main resin streams to stop premature curing. Formulators seeking certified post-consumer recycled plastic can specify the ISCC PLUS greenLine series across standard volumes.

Published highlights: Defines global A/B/C/F/L cartridge outlet geometry standards and manufactures ISCC PLUS certified greenLine PCR recycled plastic cartridges.

Potential disadvantage: Carries premium Tier-1 brand pricing in regional distributor tiers and procures through authorized distribution networks for low-volume orders.

Best suited for: Global chemical brands requiring genuine MIXPAC B/F/C-System cartridges or ISCC PLUS certified PCR sustainable packaging.

3. Nordson EFD: Best for Silicone-free molding and u-TAH coaxial caulking gun compatibility

Headquarters: East Providence, Rhode Island, USA
Founded: Founded in 1963 (Electron Fusion Devices; precision fluid dispensing division of Nordson Corporation)
Company type: Global precision fluid dispensing equipment and 2K cartridge system manufacturer
Official website: nordsonefd.com
Main products: Optimum and TAH Side-by-Side dual cartridges (50 mL to 1500 mL), u-TAH 380 mL 10:1 universal coaxial cartridges, Series 190/295 Spiral and Square static mixers
Key capabilities: Silicone-free industrial molding, integral nose-plug anti-cross-contamination design, and high-pressure Equalizer dispensing integration
Certifications & standards: ISO 9001:2015 certified quality management system across global manufacturing facilities

Nordson EFD designs side-by-side Optimum barrels and threaded TAH assemblies for industrial fluid automation. Its u-TAH universal coaxial tube lets field technicians dispense 10:1 structural pastes with a standard caulking gun. All industrial syringe barrels and twin tubes are molded in silicone-free facilities to protect bonding surfaces.

Published highlights: Pioneered the u-TAH 380 mL 10:1 coaxial cartridge that dispenses two-part structural adhesives and anchors through a standard 1K caulking gun.

Potential disadvantage: Threaded TAH outlet interfaces require matching threaded static mixer retaining nuts unless paired with bayonet adapter nozzles.

Best suited for: Construction chemical, aerospace, and electronics assembly lines requiring u-TAH coaxial cartridges or silicone-free side-by-side systems.

4. Techcon (OK International): Best for Heavy-duty PP and nylon barrels paired with calibrated applicators

Headquarters: Cypress, California, USA
Founded: Founded in 1961 (operating as a Dover Corporation / OK International precision dispensing brand)
Company type: Industrial fluid dispensing equipment and consumable cartridge system manufacturer
Official website: techcon.com
Main products: SBS Series side-by-side dual cartridges (50 mL, 200 mL, 400 mL in 1:1, 2:1, 4:1, 10:1), reusable retainers, and manual/pneumatic dual-component guns
Key capabilities: Heavy-duty polypropylene and nylon cartridge molding paired with calibrated pneumatic and manual twin-plunger applicators
Certifications & standards: ISO 9001 certified manufacturing and CE-compliant pneumatic dispensing assemblies

Techcon serves aerospace and electronics plants as part of the Dover Corporation OK International group. Its SBS Series cartridges pair directly with calibrated twin-plunger hand guns and heavy-duty pneumatic applicators. According to cross-brand geometry data, Techcon 200 mL and 400 mL A-System outlets match standard C-System collars.

Published highlights: Supplies matched SBS side-by-side cartridges and heavy-duty pneumatic guns engineered for high-viscosity industrial epoxies and potting compounds.

Potential disadvantage: Dual cartridge catalog focuses on core 50 mL, 200 mL, and 400 mL footprints rather than ultra-large 1000 mL or 1500 mL bulk barrels.

Best suited for: Electronics potting and industrial assembly plants standardizing on Techcon SBS cartridges and pneumatic applicators.

5. Fischbach KG: Best for Patented airless self-venting pistons and multi-plant EU/US/CN supply

Headquarters: Engelskirchen, North Rhine-Westphalia, Germany
Founded: Founded in 1918 (over a century of German plastics processing and cartridge molding)
Company type: High-volume European injection molder of sealant and two-component adhesive cartridges
Official website: fischbach-fi.com
Main products: Coaxial and side-by-side 2K cartridges, airless self-venting pistons, static mixers, and high-speed inline digital/offset printed barrels
Key capabilities: Patented airless self-venting plunger geometry, post-consumer recycled (PCR) HDPE/PP molding, and multi-plant production in Germany, USA, and China
Certifications & standards: ISO 9001, ISO 14001, ISO 50001 energy management, and BRCGS Packaging Materials certification

Fischbach KG brings more than a century of German plastics processing expertise to high-speed adhesive packaging. Its patented airless self-venting pistons evacuate trapped headspace air during automated filling without messy resin bleed. Multi-plant molding hubs in Germany, the United States, and China support global chemical anchor brands.

Published highlights: Engineers patented airless venting pistons that expel trapped headspace air during high-speed automated cartridge filling without adhesive bleed.

Potential disadvantage: Geared toward high-volume pallet and truckload production runs with higher minimum order quantities for custom-printed barrels.

Best suited for: High-volume construction chemical, chemical anchor, and sealant manufacturers running automated filling lines.

6. Ritter GmbH (Ritter Medical): Best for ISO 13485 cleanroom molding with automated optical inspection

Headquarters: Schwabmünchen, Bavaria, Germany
Founded: Founded in 1965 (German precision injection molding specialist)
Company type: Cleanroom medical, dental, and industrial multi-component cartridge injection molder
Official website: ritter-medical.de
Main products: DialoCliX dental and medical 2K cartridges (5 mL, 25 mL, 50 mL), coaxial and side-by-side industrial adhesive cartridges, and precision plungers
Key capabilities: ISO Class 7 and Class 8 cleanroom injection molding facility with automated optical dimensional inspection
Certifications & standards: ISO 9001, ISO 13485 medical device quality management, ISO 14001, and ISO 50001

Ritter GmbH molds medical, dental, and industrial multi-component containers inside ISO Class 7 and Class 8 cleanrooms. Its DialoCliX bayonet system provides one-hand twist locking for dental impression compounds and surgical bone cements. Buyers requiring ISO 13485 medical-grade adhesive cartridge compliance rely on Ritter optical inspection protocols.

Published highlights: Combines ISO 13485 medical cleanroom molding with DialoCliX twist-lock 2K cartridges for dental impression materials and surgical bone cements.

Potential disadvantage: Cleanroom validation and German manufacturing overhead result in higher unit costs and longer lead times for standard industrial applications.

Best suited for: Dental material, medical device adhesive, and high-purity electronics formulators requiring ISO 13485 cleanroom-molded 2K cartridges.

7. Plas-Pak Industries, Inc.: Best for Independent A and B filling lines and custom ratios up to 25:1

Headquarters: Norwich, Connecticut, USA
Founded: Founded in 1986 (US manufacturer of modular two-component plastic packaging)
Company type: Proprietary modular interlocking dual cartridge and dual syringe injection molder
Official website: plaspakinc.com
Main products: Ratio-Pak modular interlocking dual cartridges (50 mL to 750 mL, ratios from 1:1 to 25:1), twin syringes, and static mixers
Key capabilities: Independent A and B cylinder molding that snaps together after filling, allowing different resins per barrel and custom volumetric ratios up to 25:1
Certifications & standards: ISO 9001 compliant US manufacturing and lot-traceable resin processing

Plas-Pak Industries invented the modular Ratio-Pak system at its Norwich, Connecticut injection molding facility. Separate A and B cylinders snap together after filling so plants can run independent single-component filling lines. This two-piece architecture supports custom volumetric ratios from 1:1 up to 25:1 and mixed barrel polymers.

Published highlights: Ratio-Pak snap-together barrels let formulators fill Part A and Part B on separate lines and combine ratios from 1:1 up to 25:1.

Potential disadvantage: Ratio-Pak neck threads and barrel center-to-center spacing differ from standard one-piece Mixpac A/B/C/F geometries.

Best suited for: Formulators needing non-standard volumetric ratios (such as 3:1, 5:1, or 25:1) or separate A/B filling workflows.

Direct OEM Injection-Molding Dual Cartridge Factories & Custom Tooling Producers (Companies 8–14)

Direct OEM molding plants and equipment-aligned suppliers give adhesive formulators flexible access to blank barrels and custom color masterbatches. Thermally conductive two-part compounds use 50mL dual cartridges in electronics production, whereas structural pastes require 400 mL to 1500 mL tubes. Review our guide on sourcing two-component cartridges from China OEM factories before ordering.

8. Kunshan Dual Adhesive Package Co., Ltd. (NICEJOON): Best for Broad intermediate volume matrix from 5 mL micro to 1500 mL jumbo

Headquarters: Kunshan, Jiangsu Province, China
Founded: Founded in 2014 (operating under NICEJOON and Kunshan Dual Adhesive Package brand)
Company type: High-volume Chinese OEM injection molder of dual cartridges, static mixers, and dispensing guns
Official website: adhesive-pack.com
Main products: 5 mL to 1500 mL side-by-side (AB, F, C, K Series), coaxial (300 mL and 380 mL 10:1), and clip-together (25 mL 2:1, 150 mL 1:1) dual cartridges
Key capabilities: Molds 35+ cartridge size-ratio combinations from 5 mL micro-syringes to 1500 mL jumbo twin barrels across PP, PBT, PA, and PE
Certifications & standards: ISO 9001 quality management system and RoHS compliant virgin polymer selection

Kunshan Dual Adhesive Package operates under the NICEJOON trade name as a dedicated Chinese OEM molder. Its online catalog spans more than 35 size-ratio combinations, including clip-together 25 mL and 900 mL 2:1 barrels. Procurement teams often shortlist NICEJOON when sourcing intermediate capacities not stocked by Western catalog distributors.

Published highlights: Catalogs one of the widest SKU matrices online, spanning 5 mL 1:1/4:1 micro-cartridges up to 750 mL 2:1, 900 mL 2:1, and 1500 mL 1:1 barrels.

Potential disadvantage: Public product pages provide minimal English engineering documentation on piston dimensional tolerances or burst-pressure test protocols.

Best suited for: Buyers sourcing specialized intermediate sizes such as 25 mL clip-together, 450 mL 2:1, 750 mL 2:1, or 900 mL 2:1 cartridges.

9. Btektech: Best for Complete millimeter dimensional drawings and O-ring/vented piston choices

Headquarters: Suzhou, Jiangsu Province, China (Huqiu District)
Founded: Founded in 2006 (Suzhou Baotailong Electronic Materials Co., Ltd.)
Company type: OEM manufacturer of 2K dual cartridges, static mixers, and fluid dispensing valves
Official website: btektech.com
Main products: E1 to ABNS20 series dual cartridges (5 mL to 1500 mL in 1:1, 2:1, 4:1, 10:1), square-back and round-back 50 mL cartridges, and O-ring pistons
Key capabilities: Publishes full internal and external barrel diameter drawings across 28 SKU codes in PP, PA, PBT, and PE with vented and O-ring piston options
Certifications & standards: ISO 9001 quality system, CE marking on dispensing equipment, and RoHS material compliance

Suzhou Baotailong Electronic Materials runs the Btektech brand with a strong focus on engineering transparency. Its catalog publishes exact internal and external barrel diameters in millimeters across 28 distinct SKU codes. Buyers can specify square-back or round-back flanges alongside EPDM O-ring or self-venting plunger geometries.

Published highlights: Publishes exact barrel ID/OD millimeter tables for all 28 E-series, AB-series, and F-style ABNS-series dual cartridges from 5 mL to 1500 mL.

Potential disadvantage: Doesn’t maintain North American or European warehousing, requiring air or sea freight scheduling from Suzhou for export shipments.

Best suited for: Engineering teams needing published barrel ID/OD millimeter tables across square-back, round-back, and F-style cartridges.

10. Shenzhen JingDing Packaging Materials Co., Ltd. (JD2002): Best for In-house mold shop and thick-wall 385 mL/585 mL 3:1 anchor barrels

Headquarters: Pingshan District, Shenzhen, Guangdong Province, China
Founded: Founded in 2002 (over two decades of plastic adhesive packaging production)
Company type: Direct plastic injection molding factory for two-part cartridges and static mixing nozzles
Official website: jd2002.com
Main products: 25 mL to 585 mL side-by-side and coaxial dual cartridges, MA/MB/MC/MF/ME static mixers, and manual/pneumatic caulking guns
Key capabilities: In-house mold making, thick-wall 385 mL and 585 mL epoxy anchoring cartridges, and Silk-screen barrel printing in South China
Certifications & standards: ISO 9001 certified factory quality control and RoHS material compliance

Shenzhen JingDing Packaging Materials has molded two-part plastic containers in Pingshan District since 2002. The factory operates an in-house mold shop producing thick-wall 385 mL and 585 mL chemical anchor tubes. South China epoxy tile-grout and electronics potting formulators use JingDing for silk-screen printed barrels.

Published highlights: Specializes in heavy-wall 385 mL 3:1 and 585 mL 3:1/1:1 chemical anchor and tile-grout cartridges alongside standard 50 mL-400 mL AB barrels.

Potential disadvantage: Catalog tops out around 585 mL-600 mL barrels and focuses primarily on PP/HDPE construction and electronics grades rather than specialty medical resins.

Best suited for: Construction chemical anchor, two-part tile grout, and South China electronics adhesive manufacturers.

11. Fisnar Inc.: Best for Direct integration with 3-axis benchtop robots and pressure manifolds

Headquarters: Germantown, Wisconsin, USA
Founded: Founded in 1987 (subsidiary of Ellsworth Adhesives / precision dispensing group)
Company type: Industrial fluid dispensing equipment, robotic gantry, and 2K consumable supplier
Official website: fisnar.com
Main products: 50 mL, 200 mL, and 400 mL side-by-side dual cartridges (1:1, 2:1, 4:1, 10:1), static mixing nozzles, pneumatic retainer manifolds, and benchtop robots
Key capabilities: Turnkey integration of 50 mL-400 mL dual cartridges into automated 3-axis benchtop dispensing robots and pneumatic valve controllers
Certifications & standards: ISO 9001 quality management and CE-certified automated dispensing systems

Fisnar supplies industrial dispensing components and automated benchtop robotics from its Germantown, Wisconsin headquarters. Its 50 mL, 200 mL, and 400 mL twin cartridges drop into machined aluminum pressure retainer manifolds. Production engineers use these pressurized retainers to feed 3-axis bench robots on automated assembly lines.

Published highlights: Pairs standard 50 mL-400 mL dual cartridges with aluminum pressure retainers and XYZ robotic dispensing platforms for automated assembly.

Potential disadvantage: Primarily an equipment-led dispensing brand rather than a custom contract blow/injection molder for non-standard barrel colors or private-label molds.

Best suited for: Automated manufacturing lines integrating 50 mL-400 mL dual cartridges directly onto XYZ benchtop dispensing robots.

12. Adhesive Dispensing Ltd: Best for Pressure-rated silicone-free sets sold in small packs or bulk

Headquarters: Milton Keynes, Buckinghamshire, United Kingdom
Founded: Founded in 2005 (UK industrial dispensing consumables and equipment specialist)
Company type: Industrial dispensing consumables supplier and technical packaging specialist
Official website: adhesivedispensers.co.uk
Main products: 12.5 mL to 1500 mL side-by-side dual cartridges (1:1, 2:1, 4:1, 10:1) in PP, Nylon, and PBT, wiper pistons, nose plugs, and static mixers
Key capabilities: Silicone-free industrial-grade cartridge sets stocked in low-pack and bulk quantities for high-pressure pneumatic dispensing
Certifications & standards: ISO 9001 compliant supply chain, silicone-free certification, and RoHS/REACH compliance

Adhesive Dispensing Ltd stocks industrial dispensing components in Milton Keynes for rapid UK and European dispatch. Its silicone-free polypropylene, PBT, and nylon barrels support pressurized pneumatic dispensing in laboratory and factory lines. R&D labs can order small packs online with transparent tiered pricing before scaling to bulk cases.

Published highlights: Stocks ready-to-ship silicone-free PP, Nylon, and PBT dual cartridges from 12.5 mL to 1500 mL with transparent online tiered pricing.

Potential disadvantage: Operates as a specialized UK stocking supplier and system integrator rather than a low-cost Asian primary injection molding plant.

Best suited for: UK and European R&D labs and mid-volume formulators needing immediate stock delivery of PP, PBT, or Nylon dual cartridges.

13. Gluematic (Gluemation Ltd): Best for Hands-on rheology testing to pair barrels with mixer element counts

Headquarters: Stowmarket, Suffolk, United Kingdom
Founded: Founded in 1989 (over 35 years in UK industrial adhesive dispensing)
Company type: Two-component adhesive cartridge, static mixer, and meter-mix equipment specialist
Official website: gluematic.com
Main products: 50 mL, 200 mL, 400 mL, and 600 mL two-part cartridges (1:1, 2:1, 4:1, 10:1), bayonet and bell-housing static mixers, and pneumatic guns
Key capabilities: Technical matching of cartridge barrel materials, plunger lip seals, and static mixer element counts to customer adhesive rheology
Certifications & standards: ISO 9001 quality management and UKCA/CE compliant dispensing systems

Gluematic has supported British manufacturing plants from Stowmarket with two-part dispensing hardware since 1989. Its application engineers test adhesive rheology to match barrel resins with optimal static mixer element counts. The company supplies bayonet and bell-housing cartridge kits alongside industrial meter-mix dispensing machines.

Published highlights: Provides hands-on viscosity and mix-ratio testing to pair 50 mL-600 mL twin cartridges with optimal static mixer element counts.

Potential disadvantage: Focused on the UK and European industrial market with smaller breadth in custom-tooled micro or jumbo cartridge geometries.

Best suited for: UK manufacturers needing application-matched 50 mL-600 mL dual cartridges, mixers, and meter-mix dispensing hardware.

14. PC Cox (Cox Dispensers): Best for High-thrust manual, pneumatic, and battery dispenser frames

Headquarters: Newbury, Berkshire, United Kingdom
Founded: Founded in 1958 (inventor of the mastic sealant gun; part of medmix group)
Company type: Global manufacturer of manual, pneumatic, and battery-powered 2K cartridge applicators
Official website: pccox.co.uk
Main products: Powerflow, Airflow, and Electraflow 2K dual cartridge dispensers (50 mL to 1500 mL side-by-side and coaxial) and compatible cartridge retainers
Key capabilities: High mechanical advantage drive ratios and heavy-duty thrust force engineered specifically around 1:1, 2:1, 4:1, and 10:1 dual cartridges
Certifications & standards: BS EN ISO 9001:2015, BS EN ISO 14001:2015, and CE/UKCA safety compliance

PC Cox invented the modern mastic sealant gun in 1958 and now operates within the medmix group. Its Powerflow, Airflow, and Electraflow applicators deliver heavy-duty mechanical thrust for high-viscosity structural pastes. Because Cox cradle dimensions set industry benchmarks, cartridge molders design barrel flanges around Cox retainers.

Published highlights: Industry-standard OEM gun manufacturer whose cradle dimensions and plunger rod spacing dictate mechanical fitment for 50 mL-1500 mL dual cartridges.

Potential disadvantage: Manufactures the dispensing applicators and coaxial/side-by-side cradles rather than selling unbranded plastic cartridges separately from sister brand MIXPAC.

Best suited for: Adhesive brands and OEMs co-packaging heavy-duty manual, pneumatic, or cordless applicators with 2K cartridges.

Specialized Packaging Converters, Low-Waste & Application-Focused Producers (Companies 15–20)

Not every adhesive workflow buys container loads of raw plastic tubes directly from a primary molding press. Automotive panel bonding, seam sealing, and structural repair adhesives ship in 200mL and 300mL containers, while chemical anchoring resins rely on 600mL containers. In electronics assembly, 50 mL cartridges can support precise, low-waste two-part dispensing.

15. Merlin Packaging Technologies: Best for One-stop access to three major US/EU brands plus vacuum contract filling

Headquarters: Poway, California, USA
Founded: Founded in 1982 (North American specialty adhesive packaging converter and distributor)
Company type: Multi-brand 2K cartridge packaging converter, custom filler, and authorized distributor
Official website: merlinpackaging.com
Main products: Sulzer Mixpac A/B/C/F/L/Peeler-System cartridges, Nordson EFD u-TAH and TAH cartridges, Plas-Pak Ratio-Pak cartridges (2.5 mL to 1500 mL), and Twin-Pak pouches
Key capabilities: Cross-brand engineering consultation, custom contract filling/repackaging, vacuum degassing, and private-label kitting across all three major US/EU cartridge standards
Certifications & standards: ISO 9001 compliant quality assurance and MIL-SPEC / aerospace packaging traceability

Merlin Packaging Technologies serves North American adhesive formulators from Poway, California as a specialized converter. The company stocks Mixpac A/B/C/F/L and Peeler systems alongside Nordson EFD u-TAH and Plas-Pak Ratio-Pak lines. Merlin also provides custom vacuum degassing and contract filling into Twin-Pak pouches and rigid cartridges.

Published highlights: Consolidates Mixpac A/B/C/F/L/Peeler, Nordson EFD u-TAH/TAH, and Plas-Pak Ratio-Pak (2.5 mL to 1500 mL) under one roof with custom filling support.

Potential disadvantage: Operates as a value-added converter and master distributor rather than a low-cost primary injection molding factory for proprietary tooling.

Best suited for: North American chemical companies wanting side-by-side access to Mixpac, Nordson EFD, and Plas-Pak cartridges plus custom contract filling.

16. Adhesives Packaging Specialties (APS): Best for Centrifuge-free vacuum filling with full aerospace batch traceability

Headquarters: Peabody, Massachusetts, USA
Founded: Founded in 1975 (aerospace and defense certified custom chemical repackager)
Company type: Aerospace-certified custom 2K cartridge repackager, converter, and packaging supplier
Official website: apspackaging.com
Main products: Pre-filled and blank side-by-side dual cartridges (50 mL to 1500 mL), coaxial cartridges, Semkit-style barrier kits, and pre-mixed frozen syringes
Key capabilities: Centrifuge-free vacuum filling into 50 mL-1500 mL dual cartridges, custom GHS/military labeling, and full batch shelf-life certification
Certifications & standards: AS9100D and ISO 9001:2015 certified quality management system for aerospace repackaging

Adhesives Packaging Specialties holds AS9100D aerospace quality certification at its Peabody, Massachusetts facility. APS specializes in centrifuge-free vacuum filling of bulk epoxies, silicones, and polysulfides into 2K cartridges and Semkit barrier packages. Defense and aviation MRO buyers rely on APS for custom GHS labeling and shelf-life batch traceability.

Published highlights: Holds AS9100D aerospace certification for custom vacuum-filling bulk 2K epoxies, silicones, and polysulfides into 50 mL-1500 mL dual cartridges.

Potential disadvantage: Specializes in contract repackaging and aerospace kitting services rather than exporting container-loads of empty injection-molded barrels.

Best suited for: Aerospace, defense, and MRO buyers needing AS9100D-certified contract filling of bulk 2K adhesives into dual cartridges.

17. hmc2 (herrmann GmbH & Co. KG): Best for Cuts empty plastic waste volume substantially with aluminum moisture barrier

Headquarters: Hirschaid, Bavaria, Germany
Founded: Founded in 1979 (German plastics engineering and collapsible cartridge innovator)
Company type: Collapsible foil-lined dual cartridge and static mixer manufacturer
Official website: hmc2.de
Main products: Peeler-Pack collapsible twin-foil cartridges (250 mL 1:1, 400 mL 1:1, 500 mL 4:1, 550 mL 10:1), rigid 2K cartridges, and spiral static mixers
Key capabilities: Multi-layer aluminum-barrier foil sleeves fused to a rigid nose head that peel back during dispensing, cutting empty plastic waste volume substantially
Certifications & standards: ISO 9001 certified German precision manufacturing and high-barrier permeation validation

German plastics innovator hmc2 developed the Peeler-Pack collapsible system to replace rigid twin barrels. Multi-layer aluminum-barrier foil sleeves peel back through a stripping ring as the plunger advances forward. This collapsible geometry cuts empty hazardous plastic waste volume substantially while blocking moisture ingress.

Published highlights: Peeler-Pack collapsible cartridges eliminate rigid twin barrels, reducing empty hazardous waste volume substantially while boosting moisture barrier.

Potential disadvantage: Requires Peeler-compatible dispensing guns with stripping rings and specialized filling adapters compared with standard rigid open-back barrels.

Best suited for: Construction anchor and industrial adhesive brands prioritizing collapsible packaging waste reduction and aluminum-foil moisture barriers.

18. Sulzer Mixpac Dental & Industrial (Haag Heritage): Best for Color-coded cap-to-mixer poke-yoke alignment for precision micro dosing

Headquarters: Winterthur / Haag, Canton of St. Gallen, Switzerland
Founded: Founded in 1834 (Sulzer AG; established the Mixpac micro-volume F-System and B-System cartridge platform in Haag)
Company type: Swiss industrial engineering pioneer behind the Mixpac micro-cartridge and static mixing platform
Official website: sulzer.com
Main products: Micro-volume 2.5 mL, 5 mL, 10 mL, 25 mL, and 50 mL B-System and F-System dual cartridges, color-coded T-Mixers, and dental/industrial micro-dispensers
Key capabilities: High-cavitation Swiss micro-molding with color-coded cap-to-mixer poke-yoke alignment that prevents 1:1 vs. 4:1/10:1 nozzle misassembly
Certifications & standards: ISO 9001, ISO 13485 medical/dental manufacturing standards, and ISO 14001

Sulzer Mixpac established the Swiss micro-cartridge engineering heritage in Haag before spinning off medmix AG. Many aerospace, dental, and electronics drawings still specify legacy Sulzer part numbers for 2.5 mL to 50 mL tubes. Its color-coded B-System and F-System caps prevent operators from attaching the wrong ratio nozzle.

Published highlights: Engineered the color-coded B-System and F-System 2.5 mL-50 mL micro-cartridge interface used across global dental and precision electronics assembly.

Potential disadvantage: Active commercial sales and customer accounts for the Mixpac product line now transition through spun-off entity medmix AG.

Best suited for: Buyers referencing legacy Sulzer Mixpac drawing numbers for 2.5 mL-50 mL B-System and F-System micro-cartridges.

19. TechnoDigm (Technodigm Innovation Pte Ltd): Best for Local ASEAN engineering for pressurized cartridge reservoirs and valves

Headquarters: Singapore (Hillview Avenue, Lam Soon Industrial Building)
Founded: Founded in 2006 (Singapore fluid dispensing and UV curing technology manufacturer)
Company type: ASEAN automated 2K fluid dispensing system and dual cartridge consumable specialist
Official website: technodigm.com
Main products: 50 mL, 200 mL, and 400 mL dual cartridge dispensing systems, pressurized cartridge reservoirs, static mixers, and progressive cavity 2K valves
Key capabilities: Integrates standard 50 mL-400 mL dual cartridges into automated semiconductor, optics, and electronics assembly cells across Southeast Asia
Certifications & standards: ISO 9001:2015 certified quality management system for dispensing engineering

TechnoDigm Innovation supports semiconductor, optics, and electronics plants from its Singapore engineering center. The company integrates 50 mL to 400 mL dual cartridges into pressurized reservoirs feeding progressive cavity 2K valves. Local field engineers across Southeast Asia assist factories with automated potting and thermal paste dispensing.

Published highlights: Supports Southeast Asian electronics and semiconductor plants with local engineering for 50 mL-400 mL dual cartridge pressure retainers and automated valves.

Potential disadvantage: Focuses on automated dispensing integration and regional ASEAN supply rather than high-volume export of raw injection-molded plastic barrels.

Best suited for: Southeast Asian electronics, optics, and semiconductor manufacturers integrating 50 mL-400 mL 2K cartridges into automated lines.

20. Poly Dispensing Systems (PDS): Best for Clean-packaged 2K sets validated in three European application labs

Headquarters: Gennevilliers, Île-de-France, France
Founded: Founded in 2009 (French precision volumetric and two-component dispensing specialist)
Company type: European two-component dispensing consumable and PreciFluid volumetric equipment supplier
Official website: polydispensing.com
Main products: 50 mL, 200 mL, and 400 mL side-by-side dual cartridges (1:1, 2:1, 4:1, 10:1), bayonet and bell static mixers, and manual/pneumatic 2K guns
Key capabilities: European clean-packaged 2K cartridges, aluminum cartridge retainers, and micro-volumetric dispensing validation labs in France, Germany, and Spain
Certifications & standards: ISO 9001 quality compliance and CE-certified dispensing hardware

Poly Dispensing Systems operates from Gennevilliers, France with application testing labs in France, Germany, and Spain. PDS pairs clean-packaged 50 mL to 400 mL side-by-side cartridges with PreciFluid volumetric dosing equipment. European aerospace and electronics teams use its regional labs to validate mixing elements before production rollout.

Published highlights: Operates application testing labs across France, Germany, and Spain to validate 50 mL-400 mL 2K cartridges and static mixers for aerospace and electronics.

Potential disadvantage: Serves primarily European industrial accounts with higher per-unit cartridge pricing than factory-direct Asian molders.

Best suited for: French, German, and Spanish aerospace and electronics manufacturers needing local application lab validation and stocked 2K cartridges.

Barrel Resin, Piston Sealing & Mix-Ratio Engineering: 5 Specification Traps to Avoid

Ordering an empty cartridge by nominal milliliter volume and volumetric ratio alone often leads to warehouse leakage and off-ratio cure failures. Volumetric cartridge ratios (1:1, 2:1, 4:1, 10:1) are controlled by cylinder cross-sectional area as opposed to gravimetric weight ratio. Below is our 5-Trap Dual Cartridge Specification Audit covering the five common engineering failure modes.

“All lots are checked with an AQL sampling plan (ANSI/ASQC Z1.4 / ISO 2859-1), and our cartridge bodies and pistons are produced with RoHS-approved, heavy-metal-free plastics.”

5-Trap Dual Cartridge Specification Audit

• In Trap 1 (Nominal vs. Working Volume), a nominal 400 mL cartridge holds less liquid adhesive once the rear insertion pistons and tip cap seal are seated.
• In Trap 2 (Volumetric vs. Gravimetric Ratio), cartridge barrels meter strictly by volume cross-section, rather than weight when Part A and Part B differ in density.
• In Trap 3 (MMA Monomer Permeation) standard polypropylene (PP) and HDPE barrels are suitable for general two part epoxies, polyurethanes and silicones, while reactive MMA monomers require barrels of PBT or PA6 (Nylon).
• In Trap 4 (10:1 Asymmetric Backpressure), a 10:1 cartridge has a Part B cylinder that’s narrower and has one-tenth the plunger area of Part A, requiring an O-ring seal to protect the mixing result. An O-ring seal is required to protect the mixing result.
• In Trap 5 (Outlet Collar Mismatch) , connecting an open-port A-System nozzle to a rotary B-System cartridge outlet results in cross-port leakage; make sure to check bayonet, bell-mouth, and square static mixing nozzle connection types.

How Do You Choose Between PP, HDPE, PBT, and Nylon Barrels for Two-Component Adhesives?

Choose virgin polypropylene (PP) or HDPE for standard epoxies and silicones, and specify polybutylene terephthalate (PBT) or nylon (PA6) for reactive MMA acrylics. During barrel storage, Material condition and chemical resistance govern the stability of the polymer. For more information, see our epoxy, MMA and polyurethane structural adhesive comparison as well as the 4-Chemistry Barrel & Piston Selection Matrix below.

How Do O-Ring Pistons, Lip-Seal Pistons, and Vented Pistons Prevent Air Entrapment During Filling?

O-ring pistons, lip-seal pistons, and vented pistons eliminate air entrapment by removing headspace gas when the piston is inserted, and by providing a seal against barrel wall tolerances. Air in the headspace of a filled barrel acts as a pneumatic spring during the dispensing process. When the operator releases the trigger on air-powered dispensers, compressed air expands and pushes unmixed resin out the nozzle tip.

Solid double-lip pistons permit bottom-up nozzle withdrawal of medium-viscosity pastes. For top-down filling, self-venting pistons use a micro-grooved labyrinth or center vent pin. Once seated, the assembly is then ready for use without centrifuge spinning. When packaging low-viscosity assembly fluids, adding an EPDM or Viton O-ring maintains a tight seal across barrel ovality variations under ASTM D3078 vacuum bubble emission leak testing.

How to Choose a Dual Cartridge Manufacturer: 6-Point Procurement Checklist & 2026 Packaging Trends

Before awarding an annual supply contract, buyers should request factory lot certificates (ISO 2859-1 AQL and ASTM D3078 leak test reports) and test physical sample cartridges on their own filling and dispensing equipment before bulk tooling commitment. Standard two-component cartridges cover 1:1, 2:1, 4:1, and 10:1 volumetric ratios for industrial assembly.

“Dual cartridges are available in capacities from 5 ml to 1500 ml with mixing ratios including 1:1, 2:1, 3:1, 4:1, 5:1, and 10:1 for different two-component dispensing applications.”

Three Engineering Shifts Are Reshaping two-component cartridge Procurement in 2026:

• European packaging laws drive chemical companies to use Post-Consumer Recycled (PCR) Barrels, such as ISCC PLUS certified medmix greenLine, and retain virgin PE or PBT pistons, so lip interference never drifts.
• As volume in chemical anchors declines, collapsible foil-sleeved systems, including Peeler-Pack cartridges and barrier pouches, techkits, ratiopacks and hingepacks, are being evaluated to decrease the volume of empty dangerous plastic waste.
• Electric vehicle battery pack assemblers running ceramic-filled thermal gap fillers specify Automated Vacuum Bottom-Filling with nylon or thick-wall PP barrels to eliminate air voids so lines never waste material.

What Are Typical Unit Prices, MOQs, and MIXPAC Compatibility Options When Buying Blank Dual Cartridges?

Unit pricing for empty dual cartridges varies by barrel capacity, polymer resin grade, piston O-ring specification, and order tier; buyers should request a formal quote based on their annual volume. Regional stocking specialists such as Adhesive Dispensing Ltd or Merlin Packaging offer low-pack ordering for laboratory trials, whereas primary injection molders structure pricing around carton or pallet minimum order quantities.

Ordering directly from an OEM factory such as Ebestron, Btektech, or NICEJOON at carton or pallet MOQs removes multi-tier distributor markups. Direct buyers also control virgin resin selection across PP, PE, PBT, and PA6. Factory-direct OEMs mold barrels whose neck lugs and rear flanges products are compatible with Mixpac A-System, B-System, and F-System interfaces. They also support use with the C-System dual collar standard. Plants can select by mix ratio without replacing their existing dual cartridge gun fleet or static mixer inventory.

Frequently Asked Questions About Dual Cartridge Manufacturers

Below are direct engineering and procurement responses to the six questions buyers ask most frequently when qualifying a two-component cartridge supplier to compare OEM molding factories versus regional distributors and verify static mixer collar compatibility.

1. Which is the best two-component adhesive dual cartridge manufacturer for industrial OEMs?

Ebestron is the best choice for factory-direct blank 50 mL to 1500 mL cartridges, while medmix (MIXPAC) and Nordson EFD lead for proprietary branded systems. Global brands medmix and Nordson EFD fit specifications that mandate branded B/F-System or u-TAH coaxial assemblies. Fischbach KG excels in high-speed automated filling lines with airless venting pistons. For OEMs needing PP, PBT, or Nylon barrels compatible with Mixpac and Nordson dispensers, Ebestron delivers strong factory-direct value.

2. Who is the largest two-component dual cartridge manufacturer in the world?

Swiss-headquartered medmix AG (formerly the Sulzer Mixpac division) is the largest global producer of two-component cartridges and static mixing tips by installed system base. Alongside German high-volume molder Fischbach KG and U.S. dispensing leader Nordson EFD, medmix operates molding plants across Europe, North America, and Asia. Specialized Chinese OEM factories such as Ebestron, NICEJOON, and Btektech also supply high-volume empty barrels to chemical brands worldwide.

3. What is the difference between a dual cartridge manufacturer and an adhesive packaging distributor?

The primary dual cartridge manufacturer owns the steel injection molds and controls virgin polymer resin drying, validates piston interference tolerances, and performs lot-level ASTM D3078 leak testing. By contrast, an adhesive packaging distributor or converter buys finished empty cartridges from multiple brands. Distributors focus on local warehouse stocking, small-pack kitting or contract chemical repackaging, without operating primary barrel molding presses.

4. How much do empty two-component adhesive dual cartridges cost in bulk?

Bulk pricing is impacted by many factors, including barrel volume, PP versus PBT/Nylon resin grade, O-ring selection, and quantity ordered on pallets. For OEM pricing tiers, request a quote from the factory.

5. Can standard polypropylene (PP) dual cartridges hold MMA structural adhesives?

No. Reactive methyl methacrylate monomers (MMA) diffuse and swell polypropylene (PP) or high density polyethylene (HDPE) walls. Always specify PBT or nylon barrels.

6. How do you confirm whether an OEM dual cartridge fits MIXPAC B-system or C-system static mixers?

Review the nose outlet geometry on the supplier engineering drawing and run a pressurized gun test to approve bulk production. B-System and F-System cartridges use separated rotary-keyed dual ports with an external bayonet locking ring that prevents cross-channel curing between Part A and Part B. By contrast, C-System barrels use stepped end dual ports secured by an internally threaded bell retaining nut. Mount your production static mixer and retaining nut onto sample barrels, load the set into your pneumatic dispensing gun, and pressurize the assembly to confirm leak-free locking under working thrust.

Conclusion: Matching Your 2K Adhesive Formulation to the Right Dual Cartridge Partner

Choosing the right packaging partner removes the need to manually weigh, mix and pour messy two-part adhesives on the shop floor. It guarantees the consistent strength for bonding all mixed materials beads. Always verify the barrel resin compatibility, piston venting geometry, and mixer collar lock on live chemical batches first.

If you’re sourcing factory-direct blank two-component cartridges from 50 mL to 1500 mL across 1:1, 2:1, 4:1, and 10:1 ratios, contact the Ebestron engineering team at adhesivespackage.com. We provide dimensional drawings and free sample evaluation kits in PP, PE, PBT, or PA6 Nylon so your packaged components arrive tested as a complete system.

Reviewed by the Ebestron technical team, precision two-component adhesive packaging & injection molding engineering, Kunshan, China.

References & Sources

1. Ebestron (Shanghai Ebestron New Materials Co., Ltd.), Dual Cartridges Range (50 mL, 1500 mL), Material Compatibility & ASTM Testing Specifications (adhesivespackage.com/dual-cartridges/, Verified October 2026).
2. ASTM International. “Bubble Emission Method to Detect Package Leaks.” ASTM D3078 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission.
3. ASTM International. “Internal Air Pressurization Method for Flexible Package Seal Burst Test.” ASTM F2054 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization.
4. International Organization for Standardization ISO 9001:2015 Quality Management Systems Requirements & ISO 2859-1 Sampling Procedures for Inspection by Attributes.
5. Official European & Swiss Manufacturer Catalogs (Verified October 2026): medmix AG (medmix.swiss), Fischbach KG (fischbach-fi.com), Ritter GmbH (ritter-medical.de), hmc2 herrmann GmbH (hmc2.de), Sulzer AG (sulzer.com), and Poly Dispensing Systems (polydispensing.com).
6. Official North American & UK Manufacturer Catalogs (Verified October 2026): Nordson EFD (nordsonefd.com), Techcon / OK International (techcon.com), Plas-Pak Industries (plaspakinc.com), Fisnar Inc. (fisnar.com), Merlin Packaging Technologies (merlinpackaging.com), Adhesives Packaging Specialties (apspackaging.com), Adhesive Dispensing Ltd (adhesivedispensers.co.uk), Gluematic (gluematic.com), and PC Cox (pccox.co.uk).
7. Official Asia-Pacific OEM Factory Catalogs (Verified October 2026): Kunshan Dual Adhesive Package / NICEJOON (adhesive-pack.com), Btektech (btektech.com), Shenzhen JingDing Packaging (jd2002.com), and TechnoDigm Innovation (technodigm.com).